Affiliate disclosure: some outbound links go to commercial partners. We currently pass no tracking parameters, so we earn no commission from them; if that changes, this page will say so.
Quick answer
Getting started: Check wood, moisture, mould, fasteners and weather. start depends on wood/age/exposure.
Why it matters
The hard part is judging whether the wood is still serviceable: dark surface does not mean rot, and moisture plus structure decide it.
Wood.
Step by step
- Measure wood moisture (under 15%).
- Clean mould and dry fully.
- Choose stain or sealer by need.
- Check boards and fasteners.
Common mistakes
- Coating damp wood.
- Painting over mould.
- Washing with straight bleach.
- Coating only the visible face.
Checklist
- Wood, moisture, mould, fasteners, weather.
- Moisture meter.
- Wood cleaner.
- Two-day window.
Who it is for
If this is your first Getting started, narrow by Wood. and Age. first, then look at specific models.
Key facts
- Wood.
- Age.
- Exposure.
| Question | Short answer |
|---|---|
| Getting started: Stain, Seal or Replace | Getting started: Compare wood condition, maintenance appetite and budget across the three routes. start depends on wood/age/exposure. |
| Getting started: What a Deck Costs | Getting started: Convert cleaning, sanding, product and board replacement into cost per square metre. start depends on wood/age/exposure. |
| Getting started: Spending Less | Getting started: Save with DIY cleaning, area-based buying and local repair. start depends on wood/age/exposure. |
| Getting started: Stain vs Paint | Getting started: Compare looks, life and the cost of fixing peeling. start depends on wood/age/exposure. |
FAQ
Getting started: Before You Start Checklist
Getting started: Check wood, moisture, mould, fasteners and weather. start depends on wood/age/exposure.
What should I check before buying a Getting started?
start depends on wood/age/exposure. Key checks: Wood.; Age..
Is a Getting started worth it?
Depends on use, budget and upkeep; a Getting started is not automatically better because it costs more.
Source: Canadian Wood Council