Affiliate disclosure: some outbound links go to commercial partners. We currently pass no tracking parameters, so we earn no commission from them; if that changes, this page will say so.
Quick answer
Cost: Check wood, moisture, mould, fasteners and weather. cost depends on area/product/labour.
Why it matters
Cost tracks area and prep. One coat is cheap but peels in two years; cleaning, sanding and two coats cost more but last four to six.
Area.
Step by step
- Measure wood moisture (under 15%).
- Clean mould and dry fully.
- Choose stain or sealer by need.
- Check boards and fasteners.
Common mistakes
- Coating damp wood.
- Painting over mould.
- Washing with straight bleach.
- Coating only the visible face.
Checklist
- Wood, moisture, mould, fasteners, weather.
- Moisture meter.
- Wood cleaner.
- Two-day window.
Who it is for
If this is your first Cost, narrow by Area. and Product. first, then look at specific models.
Key facts
- Area.
- Product.
- Labour.
| Question | Short answer |
|---|---|
| Cost: Stain, Seal or Replace | Cost: Compare wood condition, maintenance appetite and budget across the three routes. cost depends on area/product/labour. |
| Cost: What a Deck Costs | Cost: Convert cleaning, sanding, product and board replacement into cost per square metre. cost depends on area/product/labour. |
| Cost: Spending Less | Cost: Save with DIY cleaning, area-based buying and local repair. cost depends on area/product/labour. |
| Cost: Stain vs Paint | Cost: Compare looks, life and the cost of fixing peeling. cost depends on area/product/labour. |
FAQ
Cost: Before You Start Checklist
Cost: Check wood, moisture, mould, fasteners and weather. cost depends on area/product/labour.
What should I check before buying a Cost?
cost depends on area/product/labour. Key checks: Area.; Product..
Is a Cost worth it?
Depends on use, budget and upkeep; a Cost is not automatically better because it costs more.
Source: Canadian Wood Council